商品情報にスキップ
Marithe & Francois Girbaud - Classic Logo Collar Down Jacket (Black) product image 1 | TRAB K-Fashion Australia

Marithe & Francois Girbaud

Classic Logo Collar Down Jacket (Black)

$352.00 AUD

🎁 300ドル以上お買い上げで国際配送無料

製品説明

- Classic logo collar down jacket
- Classic logo embroidered on left chest when worn
- Built-in interior pocket, logo engraved zipper puller, etc.

<SIZE & FIT>
M: Total length 68.5, shoulder width 50, chest width 61.5, hem width 61.5, sleeve length 61
L: Total length 71.5, shoulder width 52, chest width 64, hem width 64, sleeve length 63
XL: Total length 73.5, shoulder width 54, chest width 66.5, Hem width 66.5, sleeve length 64
- Size measurements are based on cross-section (cm), and there may be an error of ±1 to 3 cm depending on the measurement method and location.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model is wearing a sample for shooting.
- Model height 176 cm | Wearing size M

<MATERIALS>
- Outer fabric: 100% nylon
- Lining: 100% polyester
- Pocket material: 100% polyester
- Filling: 80% duck down, 20% duck feather
- Filling 2 (collar): 100% polyester

<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hair coming out of the needle hole is not a defect, so shake it off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
購入ガイド

この製品は、TRAB の国際購入サービスを通じて入手可能であり、韓国からオーストラリアに発送されます。

  • すべての商品は、韓国の認定ブランドストアおよび信頼できる小売店から直接仕入れています。
  • 在庫状況は韓国のブランドによって異なるため、お支払い後に商品が入手できなくなった場合は注文がキャンセルされ、全額返金される場合があります。
  • すべての製品は出荷前に真正性と品質を検査し、検査と梱包のプロセスはビデオで記録されます。
  • 1,000 オーストラリア ドルを超える注文には、10% の GSTと追加の関税 (衣料品の場合は通常 5% ) がかかる場合があります。
    かかる料金はお客様の責任となり、商品代金や配送料には含まれません
配送
  • 平均配送時間: 2〜4週間(韓国国内配送 → TRABソウル事務所 → オーストラリアへの国際配送)。
  • 天候、祝日、通関手続き、現地の状況により遅延が発生する場合があります。
  • 海外に発送されると、追跡番号が提供されます。

詳しい利用規約については、配送ポリシーをご覧ください。

返品と返金
  • 間違った商品が届いた場合、または商品に欠陥があった場合は、 100% 返金または交換いたします。
  • Returns require prior approval and must be requested within 7 days of delivery.

完全な利用規約については、返品・返金ポリシーをご覧ください。

ルックを完成させる