跳至产品信息
- A design that utilizes a lightweight material with a soft sheen and hides the stitch line to take advantage of the natural three-dimensional effect of the down filling.
- Create a classic atmosphere by using hood strings made of herringbone material.
- Front panel and out pocket design points
- Utilize classic logo artwork
- Filling: duck down 80/20
<SIZE & FIT>
S: Total length 67, shoulder width 54, chest width 65, hem width 61, sleeve length 54
M: Total length 70, shoulder width 56, chest width 67.5, hem width 63.5, sleeve length 56
L: Total length 78, shoulder width 60, chest width 72.5, hem width 68.5, Sleeve length 60
XL : : Total length 80, shoulder width 62, chest width 75, hem width 71, sleeve length 61
- Size measurements are based on cross-section (cm), and an error of ±1~3 cm may occur depending on the measurement method and location.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image. Please refer to the image.
- Model wore a sample for filming.
- Model height 172 cm | Wearing size S
<MATERIALS>
- Outer material: 100% polyester
- Lining: 100% polyester
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hairs coming out of the needle holes are not a defect, so shake them off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
Marithe & Francois Girbaud
Over Fit Hooded Duck Down Puffer (Light Beige)
$404.00 AUD
🎁 订单满 $300 即可免运费 ✨
🔎 国际运输前经过检查
💳 如果商品在韩国缺货，将全额退款
产品描述
- Overfit puffer jacket using European duck down filling- A design that utilizes a lightweight material with a soft sheen and hides the stitch line to take advantage of the natural three-dimensional effect of the down filling.
- Create a classic atmosphere by using hood strings made of herringbone material.
- Front panel and out pocket design points
- Utilize classic logo artwork
- Filling: duck down 80/20
<SIZE & FIT>
S: Total length 67, shoulder width 54, chest width 65, hem width 61, sleeve length 54
M: Total length 70, shoulder width 56, chest width 67.5, hem width 63.5, sleeve length 56
L: Total length 78, shoulder width 60, chest width 72.5, hem width 68.5, Sleeve length 60
XL : : Total length 80, shoulder width 62, chest width 75, hem width 71, sleeve length 61
- Size measurements are based on cross-section (cm), and an error of ±1~3 cm may occur depending on the measurement method and location.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image. Please refer to the image.
- Model wore a sample for filming.
- Model height 172 cm | Wearing size S
<MATERIALS>
- Outer material: 100% polyester
- Lining: 100% polyester
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hairs coming out of the needle holes are not a defect, so shake them off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
购买指南
本产品可通过TRAB的国际采购服务购买，并从韩国运往澳大利亚。
- 所有商品均直接从韩国经过认证的品牌专卖店和信誉良好的零售商处采购。
- 由于库存情况取决于韩国各品牌，如果付款后商品缺货，订单可能会被取消，并可能获得全额退款。
- 所有产品在发货前（如适用）都会经过真伪和质量检验。
- 订单金额超过 1000 澳元可能需要缴纳 10% 的商品及服务税 (GST) 和额外的关税（服装通常为 5%）。
任何此类费用均由客户承担，不包含在产品价格或运费中。
船运
- 运费
标准配送：15 美元（300 美元以下）/ 免费（300 美元以上）
加急配送：45 美元（300 美元以下）/ 30 美元（300 美元以上）
- 运费根据订单金额和选择的运输方式计算。
- 平均送货时间
标准配送：12至19个工作日
快递：7至14个工作日
- 由于天气、公共假期、海关清关或当地情况，可能会出现延误。
- 订单发货后，我们会提供追踪号码。
请查看我们的配送政策，了解完整的条款和条件。
退货及退款
- 我们接受有缺陷和无缺陷商品的退货。
- 在以下情况下，接受非质量问题退货：
发错了货。
缺少一件物品
- 该商品与订单详情或产品描述不符
- 退货需事先获得批准，且必须在收货后7天内提出申请。
请查看我们的退款和退货政策，了解完整的条款和条件。
