跳至产品信息
- Metal circle logo decoration point
- Nickel matte Kenton buttons with engraved logo
<SIZE & FIT>
S: Total length 58, waist width 34.5, hip width 45.5, hem width 18.5
M: Total length 58.8, waist width 37, hip width 48, hem width 19.5
- Size measurements are based on cross-section (cm), and an error of ±1 to 3 cm may occur depending on the measurement method and location.
- Product color is actual depending on the monitor resolution. There may be differences in color.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model wore a sample for filming.
- Model height 170.5 cm | Wearing size S
<MATERIALS>
- 97% cotton, 3% polyurethane
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Wash dark and light colors separately.
- If left wet for a long time due to sweat or rain, there is a risk of discoloration, so wash immediately.
- When washing, keep zippers/buttons/snaps closed.
- Be careful as the rubber band (shibori) expands in hot water.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Vietnam
产品描述
- Biker shorts- Metal circle logo decoration point
- Nickel matte Kenton buttons with engraved logo
<SIZE & FIT>
S: Total length 58, waist width 34.5, hip width 45.5, hem width 18.5
M: Total length 58.8, waist width 37, hip width 48, hem width 19.5
- Size measurements are based on cross-section (cm), and an error of ±1 to 3 cm may occur depending on the measurement method and location.
- Product color is actual depending on the monitor resolution. There may be differences in color.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model wore a sample for filming.
- Model height 170.5 cm | Wearing size S
<MATERIALS>
- 97% cotton, 3% polyurethane
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Wash dark and light colors separately.
- If left wet for a long time due to sweat or rain, there is a risk of discoloration, so wash immediately.
- When washing, keep zippers/buttons/snaps closed.
- Be careful as the rubber band (shibori) expands in hot water.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Vietnam
购买指南
本产品可通过TRAB的国际采购服务购买，并从韩国运往澳大利亚。
- 所有商品均直接从韩国经过认证的品牌专卖店和信誉良好的零售商处采购。
- 由于库存情况取决于韩国各品牌，如果付款后商品缺货，订单可能会被取消，并可能获得全额退款。
- 所有产品在发货前（如适用）都会经过真伪和质量检验。
- 订单金额超过 1000 澳元可能需要缴纳 10% 的商品及服务税 (GST) 和额外的关税（服装通常为 5%）。
任何此类费用均由客户承担，不包含在产品价格或运费中。
船运
- 运费
标准：15 美元（300 美元以下）/ 免费（300 美元以上）
快递：45 美元（300 美元以下）/ 15 美元（300 美元以上）
- 运费根据订单金额和选择的运输方式计算。
- 平均送货时间
标准配送：12至19个工作日
快递：7至14个工作日
- 由于天气、公共假期、海关清关或当地情况，可能会出现延误。
- 订单发货后，我们会提供追踪号码。
请查看我们的配送政策，了解完整的条款和条件。
退货及退款
- 我们接受有缺陷和无缺陷商品的退货。
- 在以下情况下，接受非质量问题退货：
发错了货。
缺少一件物品
- 该商品与订单详情或产品描述不符
- 退货需事先获得批准，且必须在收货后7天内提出申请。
请查看我们的退款和退货政策，了解完整的条款和条件。
