跳至产品信息
- Classic logo embroidered on left chest when worn
- Built-in interior pocket, logo engraved zipper puller, etc.
<SIZE & FIT>
XS: total length 63, shoulder width 47, chest width 59,6, hem width 56.5, sleeve length 59
S: total length 66, shoulder width 49, chest width 62, hem width 59, sleeve length 61
M: total length 69, shoulder width 51, chest width 64.5, hem width 61.5, sleeve length 63
L: Total length 72, shoulder width 53, chest width 67, hem width 64, sleeve length 65
XL: Total length 74, shoulder width 55, chest width 69.5, hem width 66.5, sleeve length 66
- Size measurements are based on cross-section (cm) and vary depending on the measurement method and location. An error of ±1 to 3 cm may occur.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model is wearing a sample for shooting.
- Model height 187 cm | Wearing size XL
<MATERIALS>
- Outer fabric: 100% nylon
- Lining: 100% polyester
- Filling: 80% duck down, 20% duck feather
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hair coming out of the needle hole is not a defect, so shake it off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
产品描述
- Classic logo basic down puffer jacket- Classic logo embroidered on left chest when worn
- Built-in interior pocket, logo engraved zipper puller, etc.
<SIZE & FIT>
XS: total length 63, shoulder width 47, chest width 59,6, hem width 56.5, sleeve length 59
S: total length 66, shoulder width 49, chest width 62, hem width 59, sleeve length 61
M: total length 69, shoulder width 51, chest width 64.5, hem width 61.5, sleeve length 63
L: Total length 72, shoulder width 53, chest width 67, hem width 64, sleeve length 65
XL: Total length 74, shoulder width 55, chest width 69.5, hem width 66.5, sleeve length 66
- Size measurements are based on cross-section (cm) and vary depending on the measurement method and location. An error of ±1 to 3 cm may occur.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model is wearing a sample for shooting.
- Model height 187 cm | Wearing size XL
<MATERIALS>
- Outer fabric: 100% nylon
- Lining: 100% polyester
- Filling: 80% duck down, 20% duck feather
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hair coming out of the needle hole is not a defect, so shake it off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
购买指南
本产品可通过TRAB的国际采购服务购买，并从韩国运往澳大利亚。
- 所有商品均直接从韩国经过认证的品牌专卖店和信誉良好的零售商处采购。
- 由于库存情况取决于韩国各品牌，如果付款后商品缺货，订单可能会被取消并全额退款。
- 所有产品在发货前均经过真伪和质量检验。检验和包装过程均会录像记录。
- 订单金额超过1000 澳元可能需要缴纳10% 的商品及服务税 (GST)和额外的关税（服装通常为 5% ）。
任何此类费用均由客户承担，不包含在产品价格或运费中。
船运
- 平均交货时间： 2-4 周（韩国本地交货 → TRAB 首尔办事处 → 国际运输到澳大利亚）。
- 由于天气、公共假期、海关清关或当地情况，可能会出现延误。
- 国际发货后，我们会提供追踪号码。
请查看我们的配送政策，了解完整的条款和条件。
退货及退款
- 如果发错商品或商品有缺陷，我们将提供全额退款或换货。
- Returns require prior approval and must be requested within 7 days of delivery.
请查看我们的退货和退款政策，了解完整的条款和条件。
