Skip to product information
- Classic logo embroidered on left chest when worn
- Built-in interior pocket, logo engraved zipper puller, etc.
<SIZE & FIT>
M: Total length 68.5, shoulder width 50, chest width 61.5, hem width 61.5, sleeve length 61
L: Total length 71.5, shoulder width 52, chest width 64, hem width 64, sleeve length 63
XL: Total length 73.5, shoulder width 54, chest width 66.5, Hem width 66.5, sleeve length 64
- Size measurements are based on cross-section (cm), and there may be an error of ±1 to 3 cm depending on the measurement method and location.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model is wearing a sample for shooting.
- Model height 176 cm | Wearing size M
<MATERIALS>
- Outer fabric: 100% nylon
- Lining: 100% polyester
- Pocket material: 100% polyester
- Filling: 80% duck down, 20% duck feather
- Filling 2 (collar): 100% polyester
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hair coming out of the needle hole is not a defect, so shake it off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
Marithe & Francois Girbaud
Classic Logo Collar Down Jacket (Black)
$352.00 AUD
🎁 Free standard shipping over $300 ✨
PRODUCT DESCRIPTION
- Classic logo collar down jacket- Classic logo embroidered on left chest when worn
- Built-in interior pocket, logo engraved zipper puller, etc.
<SIZE & FIT>
M: Total length 68.5, shoulder width 50, chest width 61.5, hem width 61.5, sleeve length 61
L: Total length 71.5, shoulder width 52, chest width 64, hem width 64, sleeve length 63
XL: Total length 73.5, shoulder width 54, chest width 66.5, Hem width 66.5, sleeve length 64
- Size measurements are based on cross-section (cm), and there may be an error of ±1 to 3 cm depending on the measurement method and location.
- The color of the product may differ from the actual color depending on the monitor resolution.
- The color of the actual product is most similar to the product detail image, so please refer to the image.
- The model is wearing a sample for shooting.
- Model height 176 cm | Wearing size M
<MATERIALS>
- Outer fabric: 100% nylon
- Lining: 100% polyester
- Pocket material: 100% polyester
- Filling: 80% duck down, 20% duck feather
- Filling 2 (collar): 100% polyester
<CARE INSTRUCTIONS>
- Wash inside out with neutral detergent in water at about 30 degrees Celsius and rinse thoroughly.
- Do not soak in water containing detergent and wash immediately.
- If you leave it in a lumpy state after dehydration, it may cause color transfer, so dry it immediately.
- Remove products with removable fur trimmings and wash with zippers/buttons/snaps closed.
- Insufficient rinsing or drying may cause stains, contamination, or odors, so rinse thoroughly.
- After dehydrating, dry in a well-ventilated, shady place and pat lightly to spread the filling evenly.
- When storing, do not compress. Store in a well-ventilated place by hanging the filling on a hanger in an inflated state.
- Due to the nature of the filling (down) fabric, slight hair coming out of the needle hole is not a defect, so shake it off before use.
- Do not dry with hot air as this may cause deformation of the product shape, and be sure to dry naturally.
- Please be careful as it can be ignited by a cigarette or flame.
- Damage to the product due to consumer negligence will not be compensated, so be sure to follow the above instructions.
- Layer Co., Ltd.│Manufactured in Myanmar
PURCHASE GUIDE
This product is available through TRAB’s international purchasing service and shipped from Korea to Australia.
- All items are sourced directly from verified brand stores and trusted retailers in Korea.
- Due to stock availability depends on the brands in Korea, an order may be canceled and a full refund may be issued if the item becomes unavailable after payment.
- Every product is inspected for authenticity and quality before shipping where applicable.
- Orders over AUD $1,000 may incur 10% GST and additional customs duty (typically 5% for apparel).
Any such charges are the responsibility of the customer and are not included in the product or shipping price.
SHIPPING
- Average delivery time
Standard: 12 to 19 business days
Express: 7 to 14 business days
- Delays may occur due to weather, public holidays, customs clearance, or local conditions.
- Once the order is dispatched, a tracking number will be provided.
For our full terms & conditions please view our Shipping Policy
RETURN & REFUND
- We accept returns for both defective and non-defective items.
- Non-defective returns are accepted in the following cases:
- An incorrect item was shipped
- An item is missing
- The item does not match the order details or product description
- Returns require prior approval and must be requested within 7 days of delivery.
For our full terms & conditions please view our Refund and Return Policy
